Technical Specifications: Measurement: It can made in different measurements according to the demands.
The case externally with may be 2550mm. Rear flap:  Different preferences may be applied.
According to the usage. 1- Pneumatic controlled ( as the dumper raising the flap opens)
2- Hydraulic controlled ( the flap may open without the dumper raises)
3- Both hydraulic and Pneumatic controlled. Dumper and the body: It is manufactured from high endurance
Hardox sheet which is strengthened against wears (abraions) and corrosion. It has a design of decreasing
the weight of the dumper. Additions: According to the demand 30 cm. in width can be added.
Rear Axis Pin: 100 mm It is in the quality of St 52 or St 60 the ends are bronze coated. Telescobic Cylinder
and Hydraulic Equipments: It is designed according to the conditions of bumpers length and working
conditions. The dumper got pneumatic control, double lowering ventil, dumper transmission and
transmission pump, coupled type border control safety valve. The used air hydraulic  and recordsare in
confirmation op European Union standards. The Used Iron Sheets: Manufactured by import Hardox and
domestic goods Ereğli Demir Çelik the quality is ST 52 and ST 37. Paint: All the surfaces are shaved from the
burs and cleaned with a chemical liquid precisely. It is painted two coats of epoxy coat . Belts are designed
over the paints as it is wanted. Chassis: It is manufacured as “I” crossectional from high endurance steels.
In endurance estimations, exceeding loadings had been taken into consideration. Axle: It is produce
 as 3*12 ton or 3* 9 ton carrying capacity. It is supported by Z shears and suspension bellows.
Front Shaft lifting: Controlled front shaft lifting and lowering  system in the cabin Brake: The brakes are
designed from WABCO productions. They are in accordance with European Union standards. It has an
automatic load adjusting valve. ABS system. Landing Gear: They are OMS or OVRO marked, with double
revolutions mechanic pillars with 24 tons carrying capacity each. Tyres: They are 6+1 units tyres in the
measurement of 385/65 R22.5 King- Pin: It is in accordance with 2” SAE DIN norms, durable agains high
level tension brakes, made of forget steel (42 Cr Mo4). Practical replaceable by means screw joints.
Standart accessories: 1 unit tool cupboard, Water tank made of stainless steel, 1 unit wedge and a wedge
place, Mudguard, Single spare tyre carrier, 1 unit nicycle guard. Optional Specifications: Rear axle lifting,
double basket spare tyre place, A saparate mudguard for each tyre, fire extinguishing cupboard, front
axle lifting brake system.